Media Library / Images

Connection road tanker to trailer: LTW hose assembly, DDC Dry Disconnect Coupling

Product Badges EK 145 with design to customer specification

https://elaflex.de/en/apps-services/badgecreator

https://elaflex.de/en/apps-services/badgeselector

ERV-G

Pump-tank connection; lateral offset

ERV with black, conductive PTFE lining 'TA OHM'

ERV-W 80.16 ZS 2

White Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

Storz Safety Coupling SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

Adapter: MK 80-32° Ms x MK 80-32° Ms

Special type with bent levers. The lever is bent to enable lever arrest (safe position when coupled)

DEC – Dry Evotek Couplings:

dry disconnect couplings for the chemical industry.
• Low connecting forces even against pressure
• Ergonomic handle (DN40 and bigger)
• Good transmission ratio in the cam curve
• Wide range of chemical resistance due to selection of high quality materials
• Minimized spillage during decoupling

ZVF 50 AVGAS overwing refuelling

with HD-C hose assembly

AMKI 50 SS, AVKI 50 SS

'Camlock' stainless steel female and male coupling to EN 14420 - 7

Oasis manifold, ball valves - Biogas

SPANNFIX pinned safety clamps of aluminium

SX 50 NR Al

Heating oil delivery: HD 38 reel hose

RMC 25 SS

Hose coupling with female foodstuff thread and Spannloc clamps

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 EURO UL with EA 866 scuffguard, LPG 16 hose

NB-ZVF 50 SR, ER 583 PTL

Nozzle boot f. ZVF 50 with additional spout retainer

ELAFLEX refuelling equipment for LPG (Autogas, L.P.Gas)

Heating oil delivery: ZV 500 nozzle, HD reel hose - up to 80 mtr length

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

KR 50 - 21/2"

Filling of Heating Oil Tanks: New Adapter for difficult-to-reach house connectors

LNG Refuelling

Remove N-LNG Nozzle

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

LNG Refuelling

LNG Safety Break SB-LNG VL SB-LNG FL

ContiTech Production ERV

Vulcanisation

TW filll adapters:

TWV 7 (VK 50 x MB 80), TWÜ 13 (VK 50 x 21/2" fem.)

Storz coupling on road tanker

Hose assembly with Spannfix clamp and stainless steel threaded connection

Boat refuelling, ZVA Slimline 2 GR

Pump Safety Break

PSB 16

TWO 100

TW coupling seal for Tank truck couplings DN 100 to EN 14420-6. NBR black.

ERV-G ... TW

Aircraft refueller