Media Library / Images

ZVA 25

HIFLO-Automatic nozzle DN 25 (1"), flowrate up to 140 litres/min.

Unloading petroleum products at the service station (road tanker to UST)

Connection offset UST filling point: LG 3" hose assembly for gravity discharge, LTW 50 hose assembly for vapour balance

MK-A 80 SS, TW female coupler with Active Safeguard Lever

connected: hose assembly with VKX 75.80 SS

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

ZVA Slimline 2

with Sight Glass

Double Closing COAX Safety Break

CSB 21 DC

RS 21/2 x3 SS

Reducer Female/Male

Rail car adapter type KWZ, one end with rail car thread 5½, other end 3" male BSP

LNG ship bunkering

DCC Dry Cryogenic Coupling, CBC-PERC Cryogenic Breakaway Coupling

Aircraft refuelling

Carter Underwing Nozzle, HD 63 C Neon, ZVF 50 AVGAS, SC 50 Al, HD 50 C, Hose Bead BD 50

ERV-OR 65.25

ORANGE BAND Rubber Expansion Joint for Liquid Petroleum Gas (LPG) acc. to EN 589. For tank trucks and refuelling stations. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically dissipative.

Camlock cam locking couplings:

Attachment AVB dust plug with chain to Spannloc clamps (service free of charge)

Camlock hose couplings: system comparison

Easyloc from Elaflex with automatically secured levers.

DCC Dry Cryogenic Coupling for LNG

Coupling process

Petrol station in Singapore

ZVA Slimline 2 nozzle, SSB 16 Safety Break, Slimline hose assembly

HD 100 C NEON, HD 10 C sensing hose

Type HD-C, aviation hose

L.P.Gas home delivery:

LPG 38 hose assembly

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

M 63 2½" SS, TD 76/63 PTFE, Spannloc SC 63 Al

Hose coupling with female thread, Spannloc aus Aluminium

HB 19 ST tar spraying hose

Pressure hose for road construction machines, especially for hot bitumen and heavy heating oil. Temperature range: - 25° C up to + 220° C. Meets EN 13482, Type 2 SB/B (DN 19 and DN 32 analogue).

ERV-OR

"Orange Band" Rubber Expansion Joints for L.P. Gas, depot

AKD-Hy

Coupling seal type AKD for cam locking couplings EN 14420-7. Here: of CSM

RS 2 x 78 SS

Reducer Female/Male

Spannfix safety clamps SX 75 SS of stainless steel

ELAFIX 40

Magnet adapter for installation in filler necks from DN 40. This adapter allows the refilling of urea solution with ZVA HV for AdBlue^®, without the risk of misfillings. Meets ISO 22241-4.

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

Product Badges EK 145 with design to customer specification

https://elaflex.de/en/apps-services/badgecreator

https://elaflex.de/en/apps-services/badgeselector

Universal hose assembly

PCS 75 (Polypal Clean DN 75 mm) with MX 75-3" SS and DDC-M 80-3" SS Dry Disconnect Coupling

AMX 50 PA

Ammoniac hose to EN ISO 5771 for water-free, liquid and gaseous ammonia.

Functioning principle of MannTek DDC Dry Disconnect Couplings

closed - open