Media Library / Images

SSB 25 Safety Break: Abriss

Anti-Kinking Spirals 'KSS' and 'KSS-SD'

The main bending stress area for hose assemblies is directly behind the coupling. To reinforce this area we developed the Anti-Kinking Spiral 'KSS': suitable for all ELAFLEX hoses, recommended for dynamically strong stressed universal hoses with thermoplastic linings

SPANNFIX pinned Sicherheits Klemmbacken aus stainless steel

SX 75 SS

Road tanker hose assembly

with VKC 75 SS (TW male coupling stainless steel, one part, with Spannloc clamps, K-Ring), dust cap VB 80 SS & chain

Fuel delivery at the petrol station

LTW 75 fuel delivery hose, MKX 80 female TW coupler

LPG Autogas Adapter (filler inlet) DISH

"Italian" claw coupling

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

ZVA-GBZ

Automatic nozzle ZVA DN 19, of cast bronze (GBZ), for drinking alcohol, brandy etc. Flowrate up to 60 l / min.

SG-COAX

Sight Glass for ZVA Slimline 2 GR

ELAFLEX refuelling equipment for AdBlue® urea solution

DDC-M 100, TW hose assembly

Rail tanker bottom loading with Dry Disconnect Coupling

TW coupler MK 80 SS-90° (bent lever) and dust plug VB 80 ADR SS with pressure relief

HB 19 ST tar spraying hose

Solvapal 32

Solvent hose to EN 12115 for most solvents, paints (also waterbased), water laquer, petroleum products, alcohols, alede hydes, esters and ketones. In short term operation also suitable for aromatic und chlorinated hydrocarbons.

Flexible bronze pipe connectors

Installed in manhole of a petrol station underground storage tank (UST). Suction pipes towards the dispenser pumps

KR 50 - 21/2"

Filling of Heating Oil Tanks: New Adapter for difficult-to-reach house connectors

Road tanker hose reel, made by Elaflex Italia

with LPG hose assembly

KWZ x MK 80-32°

Rail car adapter with TW coupler, bent lever

Ship bunkering with LNG

Coupling of DCC male and female part DN 50; left hand side CBC 50 Cryogenic Breakaway Coupling

KWZ x VK 80

Rail car adapter with TW male coupling

DAC-V 65

Aircraft refueller , Dry Aircraft Coupling to ISO 45 for bottom loading; detail

Elaflon Plus FEP

Embossed hose marking

ERV-G AF

Suitable for piping systems of aviation refuelling or dispensing vehicles in accordance to EN ISO 1825/EI 1529. Suitable for all aviation fuels.

SG 1" 1x0 Al

Sight Glass, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

Hose assembly with STKC 75

Storz coupling with Spannloc clamps

Oasis BV 708 1" Ball Valve for CNG

ELAFLEX Hamburg

Coax hose assembling

ZVA Slimline 2 GR, Coax hose assembly

UK

ZVA Slimline 2 GR, SG-COAX, ZVA SLimline 2, SG 1" Al

Multi Product Dispenser with / without vapour recovery; nozzles with Sight Glass

ELAFLEX refuelling equipment:

Quality is in the detail.