Media Library / Images

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ERV-G LT 100 TW

for low temperature applications

ContiTech Production ERV

Pressure impulse test

Manufacturing warm forged parts

Example SC 150 Spannloc clamp

Rubber Expansion Joint ERV-GR 80.16

GREEN BAND expansion joints for chemicals, acids, alkalis and aggressive chemical waste water. For oil-contaminated compressed air up to + 90° C. Temperature range (depending on medium) - 20° C up to + 100° C, temporarily up to + 110° C. Electrically non-conductive.

Camlock Cam Locking hose tail AMK-St 50 Ms and male adapter AVK 50-2" Ms (brass)

ContiTech Production hose

handling coil / logistics

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

ZVA Slimline 2 GR, CSB 21, SL 21 Coax

petrol station Dubai - Vapour Recovery

Spannfix safety clamps SX 75 SS of stainless steel

ZVG 2 ACME / EURO / DISH

Nozzles for L.P. Gas (Autogas) refuelling

ZVA Slimline 2 GR, hand

scuffguard and product sleeve green, Slimline hose assembly with Colour Sleeve green

ZVA Slimline 2 / ZVA Slimline 2 GR

Petrol station nozzles with (top) and without vapour recovery (below)

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings, LPG hose assemblies. Vehicle side: DGC-V male couplings with flange

Hose assembly for petrol stations

Standard hose SL 16

Rubber Expansion Joint ERV-W 80.16

WHITE BAND expansion joints for foodstuffs, also containing oil and fat. Liner corresponds to Recommendation XXI of BfR and FDA-21CFR 177.2600. Not approved for drinking water. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically non-conductive.

Hose Reel spring rewind black, FEP 50, DDC-M 50 SS

Chemical manifold

Forklift refuelling with LPG (L.P. Gas, Autogas)

GasGuard nozzle, LPG 16 hose

Boat refuelling, Hose Reel, ZVA Slimline 2 GR

Hose reel with active Vapour Recovery (VR)

DDC-V 50 F Aseptic

MannTek Dry Disconnect Coupling, DN 50, stainless steel, with Aseptic flange

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings; Use of adapters with ACME thread

ERV-GS

"Yellow Steel" Rubber Expansion Joints / ship engine room; Netherlands

Alternative fuels: DME Dimethyl Ester

DGC Dry Gas Coupling, EFL 16 Fluorline hose assembly

MC 75-3" SS

Female hose coupling for hoses, stainless steel, with Spannloc clamps

Oasis HC308 Ultra Fast Quick Fill Coupler for CNG

ZVA_AdBlue_LV_2-Stufen-Anschlag_Step2_mod

Use - 2/2

ROTEX Rubber Expansion Joints

Locomotive

Elapharm EPH 38 OHM-G with CF hose tail DIN 32676, free of dead spaces

RS 1 x 11/4 SS

Reducer Female/Male

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.